Changeset c882505 in mainline


Ignore:
Timestamp:
2013-03-26T17:44:16Z (11 years ago)
Author:
Beniamino Galvani <b.galvani@…>
Branches:
lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export
Children:
44b2b78
Parents:
0dfa93b0
Message:

Merge arm926 and bcm2835 drivers for pl011 uart and move the code
under a generic directory

Files:
2 deleted
6 edited
2 moved

Legend:

Unmodified
Added
Removed

  • HelenOS.config

    r0dfa93b0 rc882505  
    487487! [(CONFIG_HID_IN=generic|CONFIG_HID_IN=serial)&PLATFORM=ia64&MACHINE=i460GX] CONFIG_NS16550 (y/n)
    488488
    489 % Support for ARM926 on-chip UART
    490 ! [(CONFIG_HID_OUT=generic|CONFIG_HID_OUT=serial)&PLATFORM=arm32&MACHINE=integratorcp] CONFIG_ARM926_UART (y/n)
    491 
    492 % Support for BCM2835 on-chip UART
    493 ! [(CONFIG_HID_OUT=generic|CONFIG_HID_OUT=serial)&PLATFORM=arm32&MACHINE=raspberrypi] CONFIG_BCM2835_UART (y/n)
     489% Support for PL011 UART
     490! [(CONFIG_HID_OUT=generic|CONFIG_HID_OUT=serial)&PLATFORM=arm32&(MACHINE=integratorcp|MACHINE=raspberrypi)] CONFIG_PL011_UART (y/n)
    494491
    495492% Support for Samsung S3C24XX on-chip UART
    … …  
    527524
    528525% Serial line input module
    529 ! [CONFIG_DSRLNIN=y|(PLATFORM=arm32&MACHINE=gta02)|(PLATFORM=arm32&MACHINE=integratorcp&CONFIG_ARM926_UART=y)|(PLATFORM=arm32&MACHINE=beaglebone&CONFIG_AM335X_UART=y)|(PLATFORM=arm32&MACHINE=beagleboardxm&CONFIG_AMDM37X_UART=y)|(PLATFORM=ia64&MACHINE=i460GX&CONFIG_NS16550=y)|(PLATFORM=ia64&MACHINE=ski)|(PLATFORM=sparc64&PROCESSOR=sun4v)|(PLATFORM=arm32&MACHINE=raspberrypi&CONFIG_BCM2835_UART=y)] CONFIG_SRLN (y)
     526! [CONFIG_DSRLNIN=y|(PLATFORM=arm32&MACHINE=gta02)|(PLATFORM=arm32&MACHINE=integratorcp&CONFIG_PL011_UART=y)|(PLATFORM=arm32&MACHINE=beaglebone&CONFIG_AM335X_UART=y)|(PLATFORM=arm32&MACHINE=beagleboardxm&CONFIG_AMDM37X_UART=y)|(PLATFORM=ia64&MACHINE=i460GX&CONFIG_NS16550=y)|(PLATFORM=ia64&MACHINE=ski)|(PLATFORM=sparc64&PROCESSOR=sun4v)|(PLATFORM=arm32&MACHINE=raspberrypi&CONFIG_PL011_UART=y)] CONFIG_SRLN (y)
    530527
    531528% EGA support

  • kernel/arch/arm32/include/arch/mach/integratorcp/integratorcp.h

    r0dfa93b0 rc882505  
    4646#define ICP_IRQC_MAX_IRQ  8
    4747#define ICP_KBD_IRQ       3
    48 #define ICP_TIMER_IRQ    6
     48#define ICP_TIMER_IRQ     6
     49#define ICP_UART0_IRQ     1
    4950
    5051/** Timer frequency */

  • kernel/arch/arm32/include/arch/mach/raspberrypi/raspberrypi.h

    r0dfa93b0 rc882505  
    4343extern struct arm_machine_ops raspberrypi_machine_ops;
    4444
     45#define BCM2835_UART0_BASE_ADDRESS   0x20201000
     46
    4547#endif
    4648

  • kernel/arch/arm32/src/mach/integratorcp/integratorcp.c

    r0dfa93b0 rc882505  
    3737#include <ipc/irq.h>
    3838#include <console/chardev.h>
     39#include <genarch/drivers/pl011/pl011.h>
    3940#include <genarch/drivers/pl050/pl050.h>
    40 #include <genarch/drivers/arm926_uart/arm926_uart.h>
    4141#include <genarch/kbrd/kbrd.h>
    4242#include <genarch/srln/srln.h>
    … …  
    6161        icp_hw_map_t hw_map;
    6262        irq_t timer_irq;
    63         arm926_uart_t uart;
     63        pl011_uart_t uart;
    6464} icp;
    6565
    … …  
    314314                stdout_wire(fbdev);
    315315#endif
    316 #ifdef CONFIG_ARM926_UART
    317         if (arm926_uart_init(&icp.uart, ARM926_UART0_IRQ,
    318             ARM926_UART0_BASE_ADDRESS, sizeof(arm926_uart_regs_t)))
     316#ifdef CONFIG_PL011_UART
     317        if (pl011_uart_init(&icp.uart, ICP_UART0_IRQ, ICP_UART))
    319318                stdout_wire(&icp.uart.outdev);
    320319#endif
    … …  
    350349            ICP_KBD);
    351350
    352 #ifdef CONFIG_ARM926_UART
     351#ifdef CONFIG_PL011_UART
    353352        srln_instance_t *srln_instance = srln_init();
    354353        if (srln_instance) {
    355354                indev_t *sink = stdin_wire();
    356355                indev_t *srln = srln_wire(srln_instance, sink);
    357                 arm926_uart_input_wire(&icp.uart, srln);
    358                 icp_irqc_unmask(ARM926_UART0_IRQ);
     356                pl011_uart_input_wire(&icp.uart, srln);
     357                icp_irqc_unmask(ICP_UART0_IRQ);
    359358        }
    360359#endif

  • kernel/arch/arm32/src/mach/raspberrypi/raspberrypi.c

    r0dfa93b0 rc882505  
    3636#include <arch/exception.h>
    3737#include <arch/mach/raspberrypi/raspberrypi.h>
    38 #include <genarch/drivers/bcm2835/pl011_uart.h>
     38#include <genarch/drivers/pl011/pl011.h>
    3939#include <genarch/drivers/bcm2835/irc.h>
    4040#include <genarch/drivers/bcm2835/timer.h>
    … …  
    169169static void raspberrypi_output_init(void)
    170170{
    171 #ifdef CONFIG_BCM2835_UART
     171#ifdef CONFIG_PL011_UART
    172172        if (pl011_uart_init(&raspi.uart, BCM2835_UART_IRQ,
    173                             PL011_UART0_BASE_ADDRESS,
    174                             sizeof(pl011_uart_regs_t)))
     173                            BCM2835_UART0_BASE_ADDRESS))
    175174                stdout_wire(&raspi.uart.outdev);
    176175#endif

  • kernel/genarch/Makefile.inc

    r0dfa93b0 rc882505  
    9191endif
    9292
    93 ifeq ($(CONFIG_ARM926_UART),y)
     93ifeq ($(CONFIG_PL011_UART),y)
    9494        GENARCH_SOURCES += \
    95                 genarch/src/drivers/arm926_uart/arm926_uart.c
    96 endif
    97 
    98 ifeq ($(CONFIG_BCM2835_UART),y)
    99         GENARCH_SOURCES += \
    100                 genarch/src/drivers/bcm2835/pl011_uart.c
     95                genarch/src/drivers/pl011/pl011.c
    10196endif
    10297

  • kernel/genarch/include/genarch/drivers/pl011/pl011.h

    r0dfa93b0 rc882505  
    3232/**
    3333 * @file
    34  * @brief PL011 on-chip UART (PrimeCell UART, PL011) driver.
     34 * @brief ARM PrimeCell PL011 UART driver.
    3535 */
    3636
    37 #ifndef KERN_PL011_UART_H_
    38 #define KERN_PL011_UART_H_
     37#ifndef KERN_PL011_H_
     38#define KERN_PL011_H_
    3939
    4040#include <ddi/irq.h>
    4141#include <console/chardev.h>
    4242#include <typedefs.h>
    43 
    44 #define PL011_UART0_BASE_ADDRESS   0x20201000
    4543
    4644/** PrimeCell UART TRM ch. 3.3 (p. 49 in the pdf) */
    … …  
    154152} pl011_uart_t;
    155153
    156 bool pl011_uart_init(pl011_uart_t *, inr_t, uintptr_t, size_t);
     154bool pl011_uart_init(pl011_uart_t *, inr_t, uintptr_t);
    157155void pl011_uart_input_wire(pl011_uart_t *, indev_t *);
    158156

  • kernel/genarch/src/drivers/pl011/pl011.c

    r0dfa93b0 rc882505  
    3232/**
    3333 * @file
    34  * @brief PL011 on-chip UART (PrimeCell UART, PL011) driver.
     34 * @brief ARM PrimeCell PL011 UART driver.
    3535 */
    3636
    37 #include <genarch/drivers/bcm2835/pl011_uart.h>
     37#include <genarch/drivers/pl011/pl011.h>
    3838#include <console/chardev.h>
    3939#include <console/console.h>
    … …  
    9494}
    9595
    96 bool pl011_uart_init(pl011_uart_t *uart, inr_t interrupt, uintptr_t addr, size_t size)
     96bool pl011_uart_init(pl011_uart_t *uart, inr_t interrupt, uintptr_t addr)
    9797{
    9898        ASSERT(uart);
    99         uart->regs = (void*)km_map(addr, size, PAGE_NOT_CACHEABLE);
    100 
     99        uart->regs = (void*)km_map(addr, sizeof(pl011_uart_regs_t),
     100                                   PAGE_NOT_CACHEABLE);
    101101        ASSERT(uart->regs);
    102102
    103         uart->regs->control = 0;
    104         uart->regs->interrupt_clear = 0x7f;
    105         uart->regs->int_baud_divisor = 1;
    106         uart->regs->fract_baud_divisor = 40;
    107         uart->regs->line_control_high = PL011_UART_CONTROLHI_FEN_FLAG |
    108                 (3 << PL011_UART_CONTROLHI_WLEN_SHIFT);
     103        /* Disable UART */
     104        uart->regs->control &= ~ PL011_UART_CONTROL_UARTEN_FLAG;
    109105
    110         /* Enable TX and RX */
    111         uart->regs->control = 0 |
     106        /* Enable hw flow control */
     107        uart->regs->control |=
     108                PL011_UART_CONTROL_RTSE_FLAG |
     109                PL011_UART_CONTROL_CTSE_FLAG;
     110
     111        /* Mask all interrupts */
     112        uart->regs->interrupt_mask = 0;
     113        /* Clear interrupts */
     114        uart->regs->interrupt_clear = PL011_UART_INTERRUPT_ALL;
     115        /* Enable UART, TX and RX */
     116        uart->regs->control |=
    112117                PL011_UART_CONTROL_UARTEN_FLAG |
    113118                PL011_UART_CONTROL_TXE_FLAG |
    114119                PL011_UART_CONTROL_RXE_FLAG;
    115 
    116         /* Mask all interrupts */
    117         uart->regs->interrupt_mask = 0;
    118120
    119121        outdev_initialize("pl011_uart_dev", &uart->outdev, &pl011_uart_ops);
    … …  
    127129        uart->irq.handler = pl011_uart_irq_handler;
    128130        uart->irq.instance = uart;
     131
    129132        return true;
    130133}
    … …  
    137140        uart->indev = indev;
    138141        irq_register(&uart->irq);
    139         /* Enable receive interrupt */
    140         uart->regs->interrupt_mask |= (PL011_UART_INTERRUPT_RX_FLAG |
    141                                        PL011_UART_INTERRUPT_RT_FLAG);
     142        /* Enable receive interrupts */
     143        uart->regs->interrupt_mask |=
     144                PL011_UART_INTERRUPT_RX_FLAG |
     145                PL011_UART_INTERRUPT_RT_FLAG;
    142146}
    143147
Note: See TracChangeset for help on using the changeset viewer.